Card Size: 3.5"x 4" Capacity: 1mL
A revolution in Mold and Yeast testing, the R-CARD® test method offers the most convenient, streamlined way to detect not only the presence of mold and yeast, but also the number of colonies.
- Completely self-contained, requiring almost no additional equipment
- Easy to interpret results
- Fast results start showing in as little as 24 hours (incubated)
- Free technical support on any step of the process
- Molds and Yeast will show as green/teal colonies
How It Works
For Testing Yeast and Mold On/In Surfaces - Simply lift the R-CARD® Yeast and Mold clear film and deposit 1 mL of sample on the card or sterile water may be pipetted on the center of the card and the sample may be stirred into the water after collection on a sterile swab moistened with sterile water. Then release the clear film so it can fall back on top of the card, covering your sample. Within 1-3 minutes, the liquid sample will solidify between the two layers. This prevents it from dripping or leaking, making R-CARD® rapid tests incredibly easy to transport and use in the field.
For Testing Yeast and Mold In The Air - Lift the top piece of the R-CARD®. 0.50 mL sterile water is pipetted on the center of the R-Card® and releasing the top piece down and wait for 2 minutes for it to gel. Lift the top piece and hold it open using a small clip. Mold spores settle from the air during the chosen exposure time, and adhere on the gelled medium. After the predetermined exposure time, 1 mL of sterile water is pipetted to the center of the card, and the top piece is loosened and allowed to flop over the liquid. The liquid will spread laterally automatically within 1 minute.
For quickest results, it’s best to incubate your sample at 25-30°C for 24-72 hours (Molds and yeast grow well in this temperature range). Results will start showing in as little as 24 hours, but we recommend waiting until 72 hours to get an accurate count. To read your results, simply count the number of teal/green dots which show the number of Yeast and Mold colonies.
For more detailed instructions, please check out the PDFs below. Remember, we offer free technical support on any stage of the process and would be happy to instruct and advise you.
Testing 2mL-100mL Aqueous Samples on R-Card® Using Membrane Filter (PDF)
Technical Step-by-Step Instructions: View PDF document
R-CARD General Use Instructions: View PDF document
Additional Helpful and Important Information
Why R-CARD® Rapid Tests Are Better Than Competing Products
R-CARD® rapid tests offer a revolution in convenience without sacrificing accuracy. The cards are completely self-contained and don’t require petri dishes, agar, or other gear that’s fragile and prone to leak. Simply place your sample on the card and wait 1-3 minutes for the liquid sample to solidify between the two layers. This prevents it from dripping or leaking. Cards can easily be stored in a backpack or travel bag.
It’s also incredibly easy to read R-CARD® results. They not only detect the presence of molds and yeast, but also the number of colonies. Simply count the number of green/teal dots that appear after the appropriate incubation period.
Additional Equipment Needed
While the R-CARD® rapid tests are completely self-contained, you will need a sterile dropper or syringe to dispense your liquid sample onto the card and a sterile swab to collect the samples to test. Once your sample is collected, it’s recommended to use an incubator to encourage growth, but not required.
- Food & Beverage
- Cosmetics & Personal Care Products
- Environmental Monitoring
Why Choose Roth Bioscience?
Dr. Jonathan Roth is one of the most well-known names in microbiology and bacteria testing. He was the first to develop testing methods to use enzyme substrates for producing different colors to distinguish different types of bacteria. Roth Bioscience is still run by Dr. Roth, who continues to offer some of the most revolutionary innovations in the industry.